Power interface board PWR3 cable. This cable is one of a few cables that run from the power interface board to the motherboard on the Dell PowerEdge R840.
Part Category: Cables
-
R840 PIB PWR1 and PWR 2 Cable 0FFRK9
Power cable that runs from the power interface board to the motherboard on a Dell PowerEdge R840.
-
Supermicro CBL-SAST-0531
Supermicro CBL-SAST-0531 is an 80 cm (31.5 in) internal Mini-SAS HD (SFF-8643) to Mini-SAS HD (SFF-8643) cable designed for connecting a SAS/SATA RAID controller or HBA to a compatible backplane inside a server. It supports 12 Gb/s SAS (SAS-3) operation, uses 30 AWG copper conductors, and complies with T10, SFF, RoHS, and REACH standards. It is commonly found in Supermicro storage servers and chassis equipped with SFF-8643 backplanes.
This cable was pulled from a NUTANIX NXS2U1NL06G610 and was attached to a Supermicro AOC-S3008L-L8E-NI22 HBA controller.
-
R240 4 Bay LFF Backplane Signal Cable 0FV67Y
This is the signal cable that goes from the backplane to the motherboard on a Dell PowerEdge R240 4 Bay LFF server.
-
R240 4 Bay LFF PCIe Raid Cable 0882WV
PCIe RAID Mini SAS HD cable designed for the Dell PowerEdge R240 4 Bay LFF chassis.