This is the cable that runs from the backplane to a PCIe storage controller on the Dell PowerEdge R440 8 Bay server. It has just enough length to reach the internal riser where the RAID controller usually installs.
Part Category: Cables
-
R440 8 Bay BP Signal Cable 013J2R
Signal cable that connects the backplane to the motherboard for the Dell PowerEdge R440 8 Bay server.
-
R730xd 24 Bay BP Signal Cable 0F8KY1
This is the backplane signal cable for the Dell PowerEdge R730xd 24 Bay server. It connects from the backplane to the motherboard.
-
R730xd 24 Bay BP Power Cable 0CTJYF
One of 2 backplane power cables used in the R730xd 24 Bay server. It connects the backplane to the motherboard. Also compatible with the R730 16 Bay SFF server.
Notes:
- Used to provide power to the drive backplane.
- Designed for the Dell PowerEdge R730 and R730xd.
- Features a 10-pin backplane power connector.
- This is a power cable, not a SAS/SATA data cable.
- Commonly used with R730/R730xd SFF backplane configurations.
- Dell part number may appear as 0CTJYF or CTJYF.
- Verify the connector and cable routing against the specific backplane configuration before installation.
-
R730xd 24 Bay BP Power Cable 0JWGFN
This is one of 2 power cables that connect the R730xd 24 Bay backplane to the motherboard.