This is the cable that routes from the rear flex bay to the front backplane. Note – the 12 bay and 24 bay R740xd server chassis use different cables. The one you need for the 24 bay server is labeled B1 on the backplane end. Different cables are used due to differences in backplane design. The wrong cable may fit but the server will display errors.
Part Category: Cables
-
R740xd Flex Bay Power Cable 0V87NX
Power cable that runs from the flex bay to the motherboard on the R740xd.
-
R740xd Flex Bay Signal Cable 0M2CV4
1 of 3 cables that attach to the rear flex bay on the R740xd. This is the signal cable running from the flex bay to the motherboard.
-
NVME Signal Cable P20857-001
This cable runs from the backplane to the following riser. When connected it enables NVME connectivity on the last 2 drive bays.
-
Front IO Cable P20811-001
Power and signal cable for the front IO panel on the HP DL 360 G10+ server.