The other set of NVME signal cables. See the first set here. These provide NVME connectivity to 4 drive bays. Pulled from an HP DL 360 G10 Plus server.
Part Category: Cables
-
HP NVME Signal Cable P20856-001
One set of HP NVME signal cables. These cables were pulled from an HP DL 360 G10 Plus server. They enable 4 bays with PCIe connectivity. One end of the cables plugs into ports 3 and 4 on the backplane and the other side connects to the motherboard on ports 1A and 2A.
-
BOSS S2 Signal Cable 09GYJK
Signal cable that runs from the BOSS S2 module to the motherboard. Below you can see it coming out of the card along with the following power cable.
-
Power Cable For BOSS S2 Module 05HVX9
This is the cable that attaches from the BOSS module to the motherboard on the Dell PowerEdge R750.
-
R750 24-Bay Front Controller SAS Cable 05407J
This is a short cable that runs from a front RAID/HBA controller to the motherboard. See this part for the other cable required to configure a front HBA or RAID controller on the R750 24 bay server.