AKA Mr. Cold Boot

Part Category: Cables

  • R840 PIB PWR1 and PWR 2 Cable 0FFRK9

    R840 PIB PWR1 and PWR 2 Cable 0FFRK9

    Power cable that runs from the power interface board to the motherboard on a Dell PowerEdge R840.

  • Supermicro CBL-SAST-0531

    Supermicro CBL-SAST-0531

    Supermicro CBL-SAST-0531 is an 80 cm (31.5 in) internal Mini-SAS HD (SFF-8643) to Mini-SAS HD (SFF-8643) cable designed for connecting a SAS/SATA RAID controller or HBA to a compatible backplane inside a server. It supports 12 Gb/s SAS (SAS-3) operation, uses 30 AWG copper conductors, and complies with T10, SFF, RoHS, and REACH standards. It is commonly found in Supermicro storage servers and chassis equipped with SFF-8643 backplanes.

    This cable was pulled from a NUTANIX NXS2U1NL06G610 and was attached to a Supermicro AOC-S3008L-L8E-NI22 HBA controller.

  • R240 4 Bay LFF Backplane Signal Cable 0FV67Y

    R240 4 Bay LFF Backplane Signal Cable 0FV67Y

    This is the signal cable that goes from the backplane to the motherboard on a Dell PowerEdge R240 4 Bay LFF server.

  • R240 4 Bay LFF PCIe Raid Cable 0882WV

    R240 4 Bay LFF PCIe Raid Cable 0882WV

    PCIe RAID Mini SAS HD cable designed for the Dell PowerEdge R240 4 Bay LFF chassis.

  • R740xd 12B Rear Flex Bay SAS Cable 0674FN

    R740xd 12B Rear Flex Bay SAS Cable 0674FN

    This is the SAS cable for the rear flex bay on the R740xd 12 Bay server. As noted in the part page for the 24 Bay cable, this cable is specific to the 12 bay chassis. A 24 bay cable looks similar but will not work due to differences in cable pinouts and backplane design. The proper cable for the 12 Bay server will be labeled A2 on one end. Match it up with A2 on the backplane.