This is a short cable that runs from a front RAID/HBA controller to the motherboard. See this part for the other cable required to configure a front HBA or RAID controller on the R750 24 bay server.
Part Category: Cables
-
R750 24-Bay Front Controller SAS Cable 0N57F2
This is an internal Slim-SAS cable designed for the Dell PowerEdge R750 24 bay server. It’s a short run of cable to connect a front RAID/HBA controller to the backplane.
One end of the cable is labeled FCTRL_B. This end plugs into your RAID or HBA controller.
The other end is labeled EXP_DST_SB1 (Expander Destination Sideband 1) and plugs into the backplane.
-
R740 8 Bay SFF Backplane Signal Cable 0CXD5X
Signal cable that runs from the backplane to the motherboard for the R740 8 Bay SFF server.
-
R740 8 Bay SFF Backplane Power Cable 01XPP8
Power cable that runs from the backplane to the motherboard on the Dell PowerEdge R740 8 Bay SFF server.
-
R740 8 Bay SFF PCIe RAID Cable 09MHYN
PCIe RAID cable for R740 8 Bay SFF server. This cable will route from the backplane to a PCIe RAID controller installed in one of the risers.