This is the power cable that attaches from the backplane to the motherboard. It is specific to the HP DL 380 G9 8 Bay server.
Part Category: Cables
-
HP Smart Array Cable 747568-001
This cable attaches from the backplane to a compatible smart array controller in the HP DL 380 G9 server. It is specific to the 8 bay chassis.
-
R740xd NVME Cable 0RGRK6
This is one set of NVME cables for the R740xd 24 bay server. It plugs into ports A0 and B0 on the backplane and terminates at an NVME controller located in the x16 slot on riser 1. The cable provides the last 4 bays with NVME support. It has just enough length to reach the first riser. If you want to enable more NVME ports that will require 2 other sets of cables, both of which are varying lengths and are their own part numbers.
Compatible with the R740xd 24 Bay chassis.
-
HP DL 325 G10 8 Bay RAID Cable 874001-001
This is the RAID cable for the DL 325 G10 8 Bay chassis. It attaches to the backplane and then terminates at a RAID controller installed in the Mezzanine slot.
-
HP 874686-001
These are what we call the octopus cable. It’s a set of Mini SAS cables that connect Bays 1 and 2 to the SAS expander on the DL 380 24 Bay G10 server. One end of the cable attaches to Bays 2 and 3 on the backplane and the other end plugs into the SAS expander in ports 5, 6, 7, and 8.
See the following guide for more details.