PCIe RAID cable compatible with the R540 8 Bay LFF server. Cable has just enough length to reach the R540 internal riser designed for a PCIe RAID controller.
Part Category: Storage
-
Dell HDD Converter 09W8C4
The following hard drive converter adapts a regular 2.5″ SFF drive to 3.5″ LFF drive bay. If you have a large form factor server you can use these converters so your SFF drives will work. Drives are first installed into the converter and then the converter installs into an LFF caddy/drive sled.
-
R640 NVME Cable A0/B0 0684MR
This cable provides PCIe connectivity for NVME drives on the R640 10 Bay server. It connects from the backplane on ports A0/B0, routes along the left side of the chassis and terminates at the M3/M4 connectors in the rear. It enables NVME support for last 4 drive bays.
-
R640 NVME Cable A1/B1 0TXC4H
These cables supply PCIe connectivity for NVME drives on the R640 10 Bay server. They enable NVME on drive bays 2 – 5. One end connects to the backplane on ports A1/B1. The other end terminates at the rear of the chassis on ports M1/M2.
-
Dell PowerEdge R640 10 Bay PERC Cable 08Y2C8
PERC cable for the R640 10 Bay. It connects to the backplane and then terminates at one of Dells Mini Mono RAID controllers.
Installation:
Here it is installed in the server. It routes along the right side of the chassis and has just enough length to reach the mini mono controller (mini mono RAID not pictured):
