AKA Mr. Cold Boot

Part Category: Cables

  • R940 8 Bay SFF BP signal cable 0FH049

    R940 8 Bay SFF BP signal cable 0FH049

    This is the signal cable that attaches the backplane to the motherboard on a Dell PowerEdge R940 8 Bay SFF server.

    • Part Number: 0FH049
    • Dell DP/N: FH049
    • Component: Backplane signal cable
    • Server: Dell PowerEdge R940
    • Cable length: Approximately 0.15 m / 6 in
    • Connectors: 2 × proprietary 16-pin connectors
    • Purpose: Connects the R940 storage backplane to the system board/backplane interface.
    • Cable type: Backplane signal/data cable; it is not a power cable.
    • Related backplane: Used with R940 backplane assemblies, including the 8 × 2.5-inch SAS backplane.
    • Alternate/short PN: FH049
  • R940 8 Bay SFF BP Power Cable 0NMRWR

    R940 8 Bay SFF BP Power Cable 0NMRWR

    This is the power cable that connects the backplane to the motherboard on a Dell PowerEdge R940 8 Bay SFF backplane.

    • Dell part number: 0NMRWR
    • Hard drive backplane power cable
    • Used in the Dell PowerEdge R940 8 Bay SFF server
    • Provides power to the storage backplane
  • R730xd 16 Bay SFF Mini PERC Cable 06TFJ5

    R730xd 16 Bay SFF Mini PERC Cable 06TFJ5

    This is the PERC cable for the Dell PowerEdge R730 16 Bay SFF server. 2 Mini SAS HD connectors attach to the backplane and then terminate at a mini mono RAID or HBA controller.

    Notes:

    • Connects the PERC Mini Mono controller to the drive backplane.
    • Designed for the Dell PowerEdge R730 16 × 2.5-inch SFF configuration.
    • Provides two SAS connections to the backplane using 2 × SFF-8643 connectors.
    • One end uses the PERC Mini Mono connector.
    • Connects to backplane ports A and B.
    • Approximately 40 cm (15.5 inches) long.
    • Dell part numbers: 06TFJ5 / 6TFJ5.
    • Not interchangeable with FN73C; Dell identifies the two as different cables for different backplane configurations.
    • Used alongside the 0CTJYF backplane power cable and 0TRFPV motherboard cable in the R730 16-SFF backplane assembly.
  • HP DL 325 8NVME Cable Port 3/3A P05028-001

    HP DL 325 8NVME Cable Port 3/3A P05028-001

    Port 3A NVME cable for the HP DL 325 8 Bay SFF G10 NVME server.

    Notes:

    • HPE P/N: P05028-001
    • Type: NVMe cable
    • Compatible server: HPE ProLiant DL325 Gen10
    • Length: 10 inches
    • Used as part of the NVMe storage cabling for the DL325 Gen10.
    • Designed for the server’s SFF NVMe drive configuration.
    • Often listed specifically as “HPE NVMe Cable for DL325 G10 10in.”
    • Do not confuse with P05026-001, which is a different NVMe cable used in the same DL325 Gen10 platform.
  • HP DL 325 8NVME Cable Port 4/4a P05029-001

    HP DL 325 8NVME Cable Port 4/4a P05029-001

    This is an NVME cable compatible with the HP DL 325 8NVME G10 server.