Adam Strickfaden

Manufacturer: HPE

  • HP DL 360 G10 10 Bay NVME Backplane 875556-001

    HP DL 360 G10 10 Bay NVME Backplane 875556-001

    This is a so called “premium” backplane that adds NVME support to the HP DL 360 G10 server.

    Notes

    • Premium backplane supporting up to 10 × 2.5-inch hot-plug drives.
    • Supports SAS, SATA, and NVMe drive configurations with the required cabling and controller.
    • Requires separate power, SAS, and NVMe cables (such as 869674-001 for backplane power, plus the appropriate SAS/NVMe cable kits).
    • Intended specifically for the 10SFF Premium chassis and is not interchangeable with the 4SFF, 8SFF, or LFF backplanes.
    • Commonly found in high-performance DL360 Gen10 storage configurations.

    Additional photo(s):

     

     

  • HP DL 360 G10 10 Bay NVME Backplane Power Cable 869674-001

    HP DL 360 G10 10 Bay NVME Backplane Power Cable 869674-001

    Power cable that runs from the backplane to the motherboard for the HP DL 360 G10 10 Bay server with the NVME backplane.

    Notes:

    • Supplies power to the 10-bay (10SFF) Premium SAS/SATA/NVMe drive backplane.
    • Used in HPE ProLiant DL360 Gen10 servers configured with the 10SFF Premium/NVMe storage option.
    • Internal chassis cable that connects the system board or power distribution board to the drive backplane.
    • Required for proper operation of SAS, SATA, and NVMe drive configurations using the Premium backplane.
    • Intended specifically for the 10SFF Premium storage configuration and is not compatible with 4SFF, 8SFF, or LFF backplane assemblies.
  • HP DL 360 G10 Heatsink 873591-001

    HP DL 360 G10 Heatsink 873591-001

    High performance 1U heatsink pulled from an HP DL 360 G10 server.

    Notes

    • Passive heatsink that relies on the server’s high-airflow fan modules.
    • Compatible only with Intel Xeon Scalable (1st and 2nd Generation) processors using the LGA3647 socket.
    • Recommended for high-TDP CPU configurations where the standard heatsink (such as 873592-001) is not sufficient.
    • Not compatible with Gen9 or Gen11 HPE ProLiant servers.
    • Verify your server’s QuickSpecs or processor TDP requirements before substituting between standard and high-performance heatsinks.
  • HP DL 360 G10 Primary Riser 869432-001

    HP DL 360 G10 Primary Riser 869432-001

    Primary riser pulled from an HP DL 360 G10 10 Bay server. Compatible with the entire line of 360 G10 servers.

    Notes

    • This is the metal riser cage/bracket assembly, not the PCIe riser board itself. A lot of times the PCB board is included with this part number, but not always.
    • Requires the appropriate DL360 Gen10 PCIe riser card to provide PCIe slots.
    • Used as the primary (left-side) expansion riser assembly in DL360 Gen10 systems.
    • Compatible only with the DL360 Gen10 chassis; it is not intended for DL380 Gen10 or earlier generations.

     

     

  • HP DL 360 G10 10 Bay

    Compatible Parts