AKA Mr. Cold Boot

Archives: Parts

  • R730 16 Bay Backplane Assembly Cage 04G4F6

    R730 16 Bay Backplane Assembly Cage 04G4F6

    This is the assembly cage for the R730 16 Bay SFF backplane. It is not the backplane itself but rather the mounting bracket that the main backplane PCB and SAS expander attach on to.

    Notes:

    • Dell P/N: 04G4F6 / 4G4F6
    • Type: 16-bay 2.5-inch SFF backplane assembly/cage
    • Compatible server: Dell PowerEdge R730
    • Important: 04G4F6 is the mechanical backplane assembly/cage, not the backplane PCB itself.
    • The 07K5HK is the actual 16-bay SFF backplane PCB.
    • The 0DTCR0 is the SAS expander board associated with the 16-bay configuration.
    • The assembly/cage provides the physical mounting structure for the backplane and drive bays.
    • Supports a 16 × 2.5-inch SFF drive configuration when populated with the appropriate backplane and associated components.
  • R730 16 Bay SAS Expander 0DTCR0

    R730 16 Bay SAS Expander 0DTCR0

    This is the SAS expander board that is seen attached to the R730 16 Bay SFF Backplane.

    Notes:

    • Dell P/N: 0DTCR0 / DTCR0
    • Type: SAS backplane expander board
    • Compatible server: Dell PowerEdge R730
    • Used with the 16 × 2.5-inch SFF SAS/SATA backplane configuration.
    • Provides two SFF-8643 Mini-SAS connectors for the backplane’s SAS connections.
    • The expander allows the R730 to support the 16-drive SFF configuration from the storage controller. Dell’s R730 documentation identifies the expander as part of the 16-drive backplane assembly.
    • Supports 12 Gb/s SAS and 6 Gb/s SATA through the expander architecture.
    • Installs with the 07K5HK 16-bay SFF backplane.
    • Commonly associated with 04G4F6, which is the complete backplane/expander assembly or kit number.
  • R730 16 Bay SFF Backplane 07K5HK

    R730 16 Bay SFF Backplane 07K5HK

    This part is one of three parts that make up the Dell PowerEdge R730 16 Bay SFF Backplane. This specific part number refers to the PCB backplane. The other 2 parts consist of an expander PCB and the assembly cage itself that everything attaches to.

    Notes:

    • Dell P/N: 04G4F6 / 4G4F6
    • Type: 16-bay 2.5-inch SFF hard-drive backplane assembly/kit.
    • Compatible server: Dell PowerEdge R730.
    • Supports 16 × 2.5-inch SAS/SATA drives.
    • The complete assembly consists of the 07K5HK backplane, 0DTCR0/0778N6 expander, and 04G4F6/08TGM0 cage/assembly.
    • The backplane provides 2 × SFF-8643 internal SAS connections.
    • 04G4F6 is commonly used as the kit/assembly part number, while 07K5HK identifies the actual backplane board.
    • This is a SAS/SATA backplane configuration, not an NVMe backplane.

     

  • R730xd 16 Bay SFF Mini PERC Cable 06TFJ5

    R730xd 16 Bay SFF Mini PERC Cable 06TFJ5

    This is the PERC cable for the Dell PowerEdge R730 16 Bay SFF server. 2 Mini SAS HD connectors attach to the backplane and then terminate at a mini mono RAID or HBA controller.

    Notes:

    • Connects the PERC Mini Mono controller to the drive backplane.
    • Designed for the Dell PowerEdge R730 16 × 2.5-inch SFF configuration.
    • Provides two SAS connections to the backplane using 2 × SFF-8643 connectors.
    • One end uses the PERC Mini Mono connector.
    • Connects to backplane ports A and B.
    • Approximately 40 cm (15.5 inches) long.
    • Dell part numbers: 06TFJ5 / 6TFJ5.
    • Not interchangeable with FN73C; Dell identifies the two as different cables for different backplane configurations.
    • Used alongside the 0CTJYF backplane power cable and 0TRFPV motherboard cable in the R730 16-SFF backplane assembly.
  • HP DL 325 8NVME Cable Port 3/3A P05028-001

    HP DL 325 8NVME Cable Port 3/3A P05028-001

    Port 3A NVME cable for the HP DL 325 8 Bay SFF G10 NVME server.

    Notes:

    • HPE P/N: P05028-001
    • Type: NVMe cable
    • Compatible server: HPE ProLiant DL325 Gen10
    • Length: 10 inches
    • Used as part of the NVMe storage cabling for the DL325 Gen10.
    • Designed for the server’s SFF NVMe drive configuration.
    • Often listed specifically as “HPE NVMe Cable for DL325 G10 10in.”
    • Do not confuse with P05026-001, which is a different NVMe cable used in the same DL325 Gen10 platform.