AKA Mr. Cold Boot

Archives: Parts

  • R940 Mezzanine interposer 0NNRG0

    R940 Mezzanine interposer 0NNRG0

    On the R940 there is a mezzanine board that when installed supplies the server with additional memory and processors. The board connects to the motherboard with a series of cables. When lowered into its sitting position it connects to 2 of these small interposer/interface chips.

    • Dell Part Number: 0NNRG0
    • Component: Mezzanine-to-Motherboard Interface Board
    • Server: Dell PowerEdge R940
    • Type: Small interconnect/interface PCB
    • Location: Installs between the R940 mezzanine layer and the system motherboard.
    • Purpose: Provides the electrical connection between the mezzanine assembly and the motherboard.
    • Form: Small board/chip-like module rather than a conventional PCIe riser.
  • R940 NDC Card Assembly Cage 029YNF

    R940 NDC Card Assembly Cage 029YNF

    This is a bracket for the NDC. The NDC installs onto this bracket and then the bracket installs onto the motherboard. See pictures.

    • Dell Part Number: 029YNF
    • Alternate Part Numbers: 29YNF, 0VN63F, VN63F
    • Component: rNDC bracket / Network Daughter Card bracket
    • Server: Dell PowerEdge R940
    • Purpose: Provides the physical mounting and alignment bracket for the R940’s rNDC network card.
    • Type: Metal mounting bracket
    • Note: This is the bracket only, not the rNDC network adapter itself.
    • Compatibility: Specifically identified by multiple parts listings as an R940 rNDC bracket.

    Additional Photo(s):

  • R940 8 Bay SFF Backplane 0Y1VTX

    R940 8 Bay SFF Backplane 0Y1VTX

    Backplane for the Dell PowerEdge R940 8 Bay small form factor server.

    • Dell Part Number: 0Y1VTX
    • Component: 8-Bay SFF Drive Backplane
    • Server: Dell PowerEdge R940
    • Drive Bays: 8 × 2.5-inch SFF
    • Drive Interface: SAS/SATA
    • Location: Front of the server, behind the eight SFF drive bays
    • Purpose: Provides the drive connectors and electrical interface between the front storage drives and the system’s storage/controller connections.
    • Configuration: Designed for the R940 8-bay SFF storage configuration.
    • Identification: Part number 0Y1VTX is marked directly on the physical backplane.

    Additional Photo(s):

  • R940 8 Bay SFF BP signal cable 0FH049

    R940 8 Bay SFF BP signal cable 0FH049

    This is the signal cable that attaches the backplane to the motherboard on a Dell PowerEdge R940 8 Bay SFF server.

    • Part Number: 0FH049
    • Dell DP/N: FH049
    • Component: Backplane signal cable
    • Server: Dell PowerEdge R940
    • Cable length: Approximately 0.15 m / 6 in
    • Connectors: 2 × proprietary 16-pin connectors
    • Purpose: Connects the R940 storage backplane to the system board/backplane interface.
    • Cable type: Backplane signal/data cable; it is not a power cable.
    • Related backplane: Used with R940 backplane assemblies, including the 8 × 2.5-inch SAS backplane.
    • Alternate/short PN: FH049
  • R940 8 Bay SFF BP Power Cable 0NMRWR

    R940 8 Bay SFF BP Power Cable 0NMRWR

    This is the power cable that connects the backplane to the motherboard on a Dell PowerEdge R940 8 Bay SFF backplane.

    • Dell part number: 0NMRWR
    • Hard drive backplane power cable
    • Used in the Dell PowerEdge R940 8 Bay SFF server
    • Provides power to the storage backplane