CPU 2 heatsink for the R540. CPU 1 uses a different heatsink.
Archives: Parts
-
R540 CPU 1 Heatsink 0G70XM
The R540 uses 2 different heatsinks for CPU 1 and CPU 2. This is the heatsink for CPU 1.
-
R440 Rear Filler 0YFM0
In the absence of the rear riser you can install the rear filler. Its purpose is to maintain proper air flow and to prevent junk from entering into the server. If you do not have any PCIe cards installed it is recommended to install either the rear riser with a PCIe blank or to use this filler.
Installation:
-
R540 R440 Internal Riser 0PJW9F
This is the internal riser for the Dell PowerEdge R440 and R540 servers. In general, the internal riser is used for a PCIe RAID controller. You will notice the RAID cable has just enough length to reach this riser on these models of servers.
-
R640 NVME Cable A0/B0 0684MR
This cable provides PCIe connectivity for NVME drives on the R640 10 Bay server. It connects from the backplane on ports A0/B0, routes along the left side of the chassis and terminates at the M3/M4 connectors in the rear. It enables NVME support for last 4 drive bays.