This is one set of NVME cables for the R740xd 24 bay server. It plugs into ports A0 and B0 on the backplane and terminates at an NVME controller located in the x16 slot on riser 1. The cable provides the last 4 bays with NVME support. It has just enough length to reach the first riser. If you want to enable more NVME ports that will require 2 other sets of cables, both of which are varying lengths and are their own part numbers.
Compatible with the R740xd 24 Bay chassis.
This is the rear PCIe filler for the R740 and R740xd servers. It takes the place of risers 2 and 3. In the absence of these risers you install this blank so there’s not a gaping hole in the rear of your server. This prevents junk from entering the server and maintains correct air flow throughout the chassis.
Common power supply for the Dell PowerEdge R430 and R440 servers. This power supply installed into an R440 8 Bay chassis.
This is a fan module for the HP DL 325 G10 server. It attaches to the motherboard via cable. It appears to be specific to this chassis.
This is what I consider the second variation of Riser 1 for the R740 and R740xd platforms. There are a total of 3 variations. This riser has 2 x16 slots. It’s longer than the first variation, has less slots, but does include x16 slots which the first variation does not.