Primary riser assembly cage for the HP DL 360 G10+ server. Different PCB boards may come with this particular riser cage. One such board has a slim SAS connector designed to provide NVME connectivity to specific drive bays. Other variations may only have a basic x8 and x16 configuration.
Part Category: Risers
-
R540 Riser Board 0T4M6R
This is the board that installs into the following riser assembly cage.
In the picture you can see it’s already installed into the cage. Please note these are 2 separate part numbers.
-
R540 Riser Assembly Cage 08XK04
This is the metal cage for the main riser assembly. The other crucial piece is the board itself which is a separate part number and not included with the main cage.
-
R540 R440 Internal Riser 0PJW9F
This is the internal riser for the Dell PowerEdge R440 and R540 servers. In general, the internal riser is used for a PCIe RAID controller. You will notice the RAID cable has just enough length to reach this riser on these models of servers.
-
R740 Riser 1 0MDDTD
This is what I consider the second variation of Riser 1 for the R740 and R740xd platforms. There are a total of 3 variations. This riser has 2 x16 slots. It’s longer than the first variation, has less slots, but does include x16 slots which the first variation does not.