High performance cooling fan for the Dell PowerEdge R640. These are necessary for high TDP processors and NVME configurations. 14 gen servers will really ramp up the fans especially for certain processors that run hot. Installing high performance fans will reduce the overall noise of the server. Should also be paired with the following high performance heatsinks.
Part Category: Cooling
-
High Performance 1U Heatsinks 0C6R9H
High performance 1U heatsink compatible with R640 and R740 Dell PowerEdge servers. Recommended if your processor TDP exceeds 125 Watts. Please Note that while compatible with the R740 and R740xd, these servers have a 2U high performance heatsink. It is recommended you use the 2U high performance heatsink instead.
-
Standard 1U Heatsink 00F8NV
These are the 1U standard performance heatsinks compatible with R640 and R740 Dell PowerEdge servers.
-
R740xd Rear Filler 04D2N2
This is the rear PCIe filler for the R740 and R740xd servers. It takes the place of risers 2 and 3. In the absence of these risers you install this blank so there’s not a gaping hole in the rear of your server. This prevents junk from entering the server and maintains correct air flow throughout the chassis.
Installation:
The filler installs in the rear of the chassis.
