Adam Strickfaden

Part Category: Cooling

  • HP DL 380 G10 Heatsink 873592-001

    HP DL 380 G10 Heatsink 873592-001

    Heatsink pulled from an HP DL 380 G10 server.

    Notes

    • Passive heatsink; relies on the server’s high-airflow fan modules.
    • Compatible only with Gen10 Intel Xeon Scalable platforms using the LGA3647 socket.
    • Not interchangeable with Gen9 or Gen11 heatsinks.
    • HPE also offers higher-performance heatsinks for processors with higher TDP ratings; verify your CPU’s thermal requirements before substituting.
  • Supermicro 1u Heatsink SNK-P0046P

    Supermicro 1u Heatsink SNK-P0046P

    This is a heatsink pulled from a Supermicro SuperServer SYS-5019S-MR.

    Notes

    • 1U passive CPU heatsink for Supermicro rack servers.
    • Designed for systems with front-to-back chassis airflow; does not include a cooling fan.
    • Supports Intel Xeon E3-1200 series processors and Intel Core processors.
    • Compatible with LGA1150 and LGA1155 sockets.
    • Supports processors with TDPs up to 95W.
    • Ships with pre-applied thermal interface material.
    • Requires the BKT-0028L heatsink retention bracket for installation.
  • HP DL 380 G10 Cooling Assembly Cage 867119-001

    HP DL 380 G10 Cooling Assembly Cage 867119-001

    This is the primary cooling assembly cage for the HP DL 380 G10 line of servers. It’s compatible with both the standard and high performance fan variations.

    Notes

    • This is the fan cage only (unless sold as a populated assembly). Some listings include all six fans, while others include just the cage, so verify what’s included before purchasing.
    • The fan cage accepts both standard and high-performance DL380 Gen10 hot-plug fan modules, depending on the server configuration and cooling requirements.
  • HP DL 380 G10 High Performance Fan 875788-001

    HP DL 380 G10 High Performance Fan 875788-001

    This is a high performance fan from HP commonly found in their DL 380 G10 line of servers.

    Notes

    • The DL380 Gen10 supports both Standard Performance and High Performance fan kits.
    • Servers equipped with high-TDP processors (such as 205W CPUs), GPUs, or certain expansion cards typically require the 875788-001 high-performance fans.
    • Mixing standard and high-performance fan modules in the same server is generally not recommended. Refer to the server’s QuickSpecs for supported configurations.

    SPS: 875076-001

  • R740 GPU Air Shroud 0RFFDP

    R740 GPU Air Shroud 0RFFDP

    This is the so called GPU air shroud for the R740 and R740xd servers. It is designed specifically for certain GPUs like the Tesla M10. The shroud is installed first and then the GPU. It is reported to maximize airflow especially for larger graphics cards. It should be noted that this shroud is incompatible with the 2U high performance heatsinks. 1U heatsinks are required to use the shroud which in my opinion might not be a worthy tradeoff depending on your CPU, and also considering that large graphics cards work just fine with the 2U heatsinks and normal air shroud, albeit with perhaps a minor hit to air flow efficiency.