This card is commonly shipped with the Dell PowerEdge R440. It installs into the rear mezzanine port. The card itself provides 2 Rj-45 Gigabit ports.
Installation:
Archives: Parts
-
R740xd NVME Cable 0RGRK6
This is one set of NVME cables for the R740xd 24 bay server. It plugs into ports A0 and B0 on the backplane and terminates at an NVME controller located in the x16 slot on riser 1. The cable provides the last 4 bays with NVME support. It has just enough length to reach the first riser. If you want to enable more NVME ports that will require 2 other sets of cables, both of which are varying lengths and are their own part numbers.
Compatible with the R740xd 24 Bay chassis.
-
R740xd Rear Filler 04D2N2
This is the rear PCIe filler for the R740 and R740xd servers. It takes the place of risers 2 and 3. In the absence of these risers you install this blank so there’s not a gaping hole in the rear of your server. This prevents junk from entering the server and maintains correct air flow throughout the chassis.
Installation:
The filler installs in the rear of the chassis. -
550W 80 Plus Platinum PSU 0X185V
Common power supply for the Dell PowerEdge R430 and R440 servers. This power supply installed into an R440 8 Bay chassis.
-
HP DL 325 G10 Fan P04998-001
This is a fan module for the HP DL 325 G10 server. It attaches to the motherboard via cable. It appears to be specific to this chassis.