One set of HP NVME signal cables. These cables were pulled from an HP DL 360 G10 Plus server. They enable 4 bays with PCIe connectivity. One end of the cables plugs into ports 3 and 4 on the backplane and the other side connects to the motherboard on ports 1A and 2A.
Archives: Parts
-
BOSS S2 M.2 Carrier 0HM7F6
This is a carrier for an M.2 storage drive. It installs into the following BOSS S2 module.
-
BOSS S2 Signal Cable 09GYJK
Signal cable that runs from the BOSS S2 module to the motherboard. Below you can see it coming out of the card along with the following power cable.
-
BOSS-S2 Module 0FGNRW
BOSS-S2 module. This module attaches to riser 1 on the R750 and adds support for dual redundant M.2 drives. 2 cables attach from the module to the motherboard. Below you can see it installed on riser 1:
-
Power Cable For BOSS S2 Module 05HVX9
This is the cable that attaches from the BOSS module to the motherboard on the Dell PowerEdge R750.