AKA Mr. Cold Boot

Part Category: NVME

  • R740xd NVME cable A2 B2 0C1FRG

    R740xd NVME cable A2 B2 0C1FRG

    There are 3 sets of cables to enable full NVME support on the Dell PowerEdge R740xd 24 bay server. This is the third set of cables that plug into ports A2 and B2.

    Notes:

    • NVMe backplane cable for the Dell PowerEdge R740xd 24-bay SFF configuration.
    • Connects the NVMe backplane to the PCIe/drive-expander connection.
    • Used for the A2/B2 NVMe backplane connections.
    • Dual SlimSAS (SFF-8654) cable.
    • Associated with the R740xd 24-bay 2.5-inch NVMe configuration.
    • Dell DP/N: 0C1FRG (C1FRG).
  • HP DL 325 8NVME Cable Port 3/3A P05028-001

    HP DL 325 8NVME Cable Port 3/3A P05028-001

    Port 3A NVME cable for the HP DL 325 8 Bay SFF G10 NVME server.

    Notes:

    • HPE P/N: P05028-001
    • Type: NVMe cable
    • Compatible server: HPE ProLiant DL325 Gen10
    • Length: 10 inches
    • Used as part of the NVMe storage cabling for the DL325 Gen10.
    • Designed for the server’s SFF NVMe drive configuration.
    • Often listed specifically as “HPE NVMe Cable for DL325 G10 10in.”
    • Do not confuse with P05026-001, which is a different NVMe cable used in the same DL325 Gen10 platform.
  • HP DL 325 8NVME Cable Port 4/4a P05029-001

    HP DL 325 8NVME Cable Port 4/4a P05029-001

    This is an NVME cable compatible with the HP DL 325 8NVME G10 server.

     

  • HP DL 325 8NVME Cable Port 2/2A P05027-001

    HP DL 325 8NVME Cable Port 2/2A P05027-001

    Port 2/2A NVMe cable for the HPE ProLiant DL325 Gen10 8-bay SFF NVMe backplane. This cable connects from the NVME backplane to the motherboard.

    Notes:

    • HPE P/N: P05027-001
    • Type: Internal NVMe cable
    • Compatible server: HPE ProLiant DL325 Gen10
    • Length: 8.5 inches (approximately 220 mm)
    • Connector: 74-pin
    • Configuration: Straight connector to right-angle connector
    • Application: Connects the 8-SFF NVMe storage configuration within the DL325 Gen10.
    • Also described as “Slimline SAS 8SFF NVMe 220mm” in parts listings.
    • Internal cable; not a power cable.
    • This is distinct from P05026-001, which is also listed as an NVMe cable but is a different cable/length.
  • HP DL 325 8NVME Backplane P07019-001

    HP DL 325 8NVME Backplane P07019-001

    This is the NVME backplane for the HP DL 325 G10 8 Bay server.

    Notes:

    • HPE P/N: P07019-001
    • Type: 8SFF NVMe backplane
    • Compatible server: HPE ProLiant DL325 Gen10
    • Supports 8 × SFF NVMe drives.
    • Provides the PCIe/NVMe interface between the front NVMe drives and the server’s PCIe infrastructure.
    • HPE identifies it as “SPS-PCA, Backplane, 8SFF NVMe.”
    • The backplane is used with the NVMe-enabled DL325 Gen10 configuration and can be paired with the P07020-001 slimline 8SFF NVMe cable kit.
    • Form factor: 2.5-inch SFF drive bays.
    • Interface: PCIe/NVMe.
    • Part-number cross-reference: P05023-001 is listed as a compatible part number by one parts supplier.